Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber, 55° Shore hardness. Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. Temperature resistant up to 80°C. For a linear resilience characteristic the Spring Load C means, for any operating point, the constant relation of load F [N] to jounce travel f [mm]. C = F/f [N/mm]. In the technical data, these constants are stated as CD for pure pressure load and as CS for pure shear load. * F perm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive prestressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be accordingly reduced.
Rubber Metal Buffer
Rubber-metal buffer MGA diameter 70mm height 45mm thread M10 x
Rubber Metal Buffer
Rubber buffers
Hby Blue Pu Id = 20 Mm - 80 Mm Piston Buffer Seal Urethane With
Greenco Black Rubber Metal Buffer at Rs 70/piece in Sangli
Rubber-Metal Buffers - Multidimensions
Rubber Buffer Diameter 20mm, Heigth 20mm, M6x18mm Male / M6 Female
Rubber buffer Type DZ (cylindrical)
Male Female Rubber Buffer : Type M (Type D) - Manufactured by ZONG YIH
Crane Rubber Buffer, For Material handling equipment at Rs 100
Rubber-Metal Buffer
20*15*M6*18 Ve Type Single Head Screw Anti-Vibration Mat Treadmill
Rubber buffers