L-Com Connectivity Product - Single Port CAT-5 Midspan PoE

L-COM CONNECTIVITY's BTD-CAT5-P1 is a single-port CAT 5 PoE injector that provides DC power for one PoE-equipped device. It is compatible with AP's and other equipment supporting the IEEE standard PoE pinouts.<lt/>br<gt/><lt/>br<gt/>This unit can be used as either an "Injector" or as a "Tap." When used as an injector the device sends DC power through the Ethernet cable to a remote PoE device. When used as a "Tap" this unit taps the injected DC power from the Ethernet cable for use by certain non-PoE devices. The integral lightning and surge protection individually protects the 4 data lines as well as protection for the power lines. High speed devices clamp any voltage, positive or negative on the wires. The limits are +/- 15 V on pins, 1, 2, 3, 6 and +/- 58 V on pins, 4, 5, 7, and 8.<lt/>br<gt/><lt/>br<gt/>The BTD-CAT5-P1 features shielded RJ45 jacks. This along with the BTD-CAT5-P1's metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the injector's cast aluminum housing providing superior grounding.<lt/>br<gt/><lt/>br<gt/>This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.

4-Port Gigabit+1GE PoE Switch IEEE802.3af/at standard

PoE+ Midspan Injector, 1 Port Power Over Ethernet, 10 Gbps, CAT 6a

AXIS PoE Midspan 16 port

AXIS T8134 60W High PoE 1-Port Midspan

This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable,

1-Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af

10/100/1000M single port PoE injector - POE Injector - FTTH

L-com Single Port DIN Mount CAT5 Passive PoE Midspan Injector

PoE for WiFi

1-Port Gigabit Midspan - PoE+ Injector - Ethernet Extenders

Why hasnt anyone thought of this before. Anyone that has installed POE powered IP phones or IP cameras has probably had a need for something like this. POE Powered 2 Port Unmanaged Switch: This device will take an incoming POE power source to be powered and act as a standard 2 Port POE switch. Has 1 port in and 2 Ports out. Useful if you want to take an incoming POE signal sent through one cable and be split out to power 2 cameras at once.

IPCamPower PoE Powered 2 Port Switch & Network Cat5 Cat6 Midspan Cable Range Extender Passthrough Repeater for IP Cameras