AiM USB Adapter Cable for MXL2, MXG / MXP / MXS, MXm, EVO5 - Pegasus Auto  Racing Supplies

AiM USB Adapter Cable for MXL2, MXG / MXP / MXS, MXm, EVO5 - Pegasus Auto Racing Supplies

4.9
(530)
Bewertung schreiben
Mehr
€ 40.00
In den Warenkorb
Auf Lager
Beschreibung

This is the same ECU harness supplied with the AiM EVO4 data logger. It has a 5-pin 712 (metal screw-in) connector at one end and 5 un-terminated

AiM EVO4 Serial/CAN Cable, 5-Pin 712 to 5 Wires

This is the same male 4-pin Binder 719 (plastic snap-together) connector used on almost every AiM sensor. If you want to make your own custom

AiM 4-Pin 719 (Push-In) Male Connector Only, each

Upgrade from an MXL Pista or Strada dash to the AiM MXL 2 or 1st-generation MXG / MXS dash quickly and easily with this adapter harness!

AiM MXL Pista to MXL 2 / MXG / MXS Adapter Harness

PK Power AC Adapter for Logitech E-X5C19 EX5C19 841-000038 Driving Force GT Power Supply : Electronics

This adapter cable is required when connecting your AiM MXL2, MXG/MXP/MXS, or MXm dash or EVO5 data logger to your laptop without using the wi-fi

New - AiM USB Adapter Cable for MXL2, MXG/MXP/MXS, MXm, EVO5

This harness plugs into the 37-pin connector on the AiM MXL2 and MXG/MXP/MXS data logging dashes. This is an alternative to the harness included with

AiM Primary Harness, OBDII for MXL2, MXG / MXP / MXS

MyVolts 12V Power Supply Adaptor Compatible with/Replacement for Headrush MX5 Effects Pedal - US Plug : Tools & Home Improvement

Car Cables & Harness

AiM Adapters & Cables - Race Beat

AiM USB Adaptor 719 Binder

AiM MXL Pista to MXL 2-MXG-MXS Adapter Harness

This USB download cable has a male 1/8 (3.5mm) stereo plug to connect to most MXL series dashes (except those made in 2004 and those supplied in Seat

AiM MXL (3.5mm) Download Cable

Extend the capabilities of your AiM data logger without occupying any more channels or running more cables to your dash. Connect up to four CAN

AiM 4-Port CAN Data Hub for MXL, MXG/MXS, EVO - 0.4m Cable

Car Cables & Harness

This optional cable can be used to connect your AiM EVO4 data logger to an ECU via the OBD-II port for a plug-and-play installation! It has a 5-pin

AiM EVO4 Cable, 5-Pin 712 to OBD-II (CAN only) Connector